Mobility Scooter Charger for Health Care

The charger is designed for use with a 54.6V 1.5A lithium battery. It has an input voltage range of 100-240VAC and a frequency of 50/60Hz, with a maximum input current of 2.0A. The output of the charger is 54.6V at 1.5A.

The charger is equipped with various protection features, including short circuit, overload, and overvoltage protection. This ensures the safety and reliability of the charging process.

The charger is globally applicable, as it can handle a wide range of AC input voltages. It also boasts high efficiency and a soft starting current, which effectively reduces the impact of the AC input, resulting in a compact and lightweight design.

The cable length of the charger is 39.4 inches (100 cm), providing ample reach for various charging scenarios. The charger features an indication light, which turns green when the battery is fully charged and red during the charging process. The charger automatically stops charging when the battery is full.

The connector on the charger is a 3-prong jack male GX16, with the positive and negative poles clearly marked. It is important to confirm the polarity of the charging port before using the charger.

The maximum operating temperature of the product is 40°C (104°F). The charger case is made of high-quality plastic, ensuring a smooth appearance and no impurities.

The charger is designed to automatically detect when the battery is fully charged, provided the battery has a Battery Management System (BMS) installed. Once the battery is fully charged, the charger will automatically switch off.

During operation, the LED indicator on the charger turns red, indicating that the charging process is in progress. The charger may get slightly warm during use, but this is normal. To improve heat dissipation, you can place two small blocks under the charger.

When using the charger, it is important to follow these guidelines: 1. Charge the battery in a dry environment. 2. Do not leave the power supply connected when the charger is not in use. 3. Avoid overcharging the battery. Disconnect the charger when the indicator light turns green, indicating a full charge. 4. Charge the battery before it is completely drained to 0%. This helps protect the battery and prevents potential damage. 5. If the battery has not been used for an extended period (2-3 months), charge it before use to ensure it is not damaged. 6. Maintain a regular shallow discharge pattern, with a deeper discharge every 3 months to activate the battery's long-term immobile materials. 7. Confirm the battery type before use. The charger is designed specifically for lithium batteries and should not be used with LiFePO4 batteries, as it may overheat. 8. When connecting the charger, first attach the battery to the charger cable, then plug the charger into the AC power source. Disconnect the power source first before removing the battery connection, especially when the charging current is high (indicated by a red LED).

By following these guidelines, you can ensure the safe and efficient use of the 54.6V 1.5A lithium battery charger.

product information: